]]>
]]>
AIM will be attending Laughlin from April 25-29.
If you are attending and interested in our products but never had a chance to check us out come on by!
We will be providing free installation at our booth.
For more information on making your installation reservation - please contact us. Our booth will be located at Riverside Resort Hotel & Casino.
AIM will be attending Laughlin from April 25-29.
If you are attending and interested in our products but never had a chance to check us out come on by!
We will be providing free installation at our booth.
For more information on making your installation reservation - please contact us. Our booth will be located at Riverside Resort Hotel & Casino.
We created a tool that will hold the A&S Pressure Plate in place when you're installing the VP-SDR or changing springs! If you have done the job before, you know that the pressure plate can become misaligned causing a big headache trying to put it back in. This tool prevents the pressure plate from rising so that you can easily swap out the springs and pressure plate.
Please ask about it when you place your next order!
]]>
We created a tool that will hold the A&S Pressure Plate in place when you're installing the VP-SDR or changing springs! If you have done the job before, you know that the pressure plate can become misaligned causing a big headache trying to put it back in. This tool prevents the pressure plate from rising so that you can easily swap out the springs and pressure plate.
Please ask about it when you place your next order!
]]>It's been a while since our last update, but we are back!
Bonneville is around the corner, and SALT FEVER IS HERE!!
We will be supporting our good friend Hiro Koiso who's going to be participating in the Bonneville Speed Trial!
Don't be a stranger and come say hello! We're going to be there from the 25th to the 31st!
Best part is you get to witness our CF2 Clutch on Hiro Koiso's monstrous bike.
If you've been following Hiro's social media you know that bike is no joke!
Everything from chromoly axles and a custom nitrous holding tank... the level of work done to the bike is just beyond amazing.
Remember to bring your shades and water!
Hope to see you out there!
-AIM Corp.
]]>
It's been a while since our last update, but we are back!
Bonneville is around the corner, and SALT FEVER IS HERE!!
We will be supporting our good friend Hiro Koiso who's going to be participating in the Bonneville Speed Trial!
Don't be a stranger and come say hello! We're going to be there from the 25th to the 31st!
Best part is you get to witness our CF2 Clutch on Hiro Koiso's monstrous bike.
If you've been following Hiro's social media you know that bike is no joke! Check out his page here https://www.facebook.com/hirokoisoracing/ or @hirokoisoracing on Instagram.
Everything from chromoly axles and a custom nitrous holding tank... the level of work done to the bike is just beyond amazing.
Remember to bring your shades and water!
Hope to see you out there!
-AIM Corp.
]]>
We are proud to announce that we are now supplying one of our VP Clutches for Trask Performance who is well known as one of the manufactures of Turbo Charger Kits.
The Trask edition red weights VP Clutch with the 500 lbs spring handles over 170 ft-lbs torque.
TraskPerformance: http://traskperformance.com
]]>
The Trask edition red weights VP Clutch with the 500 lbs spring handles over 170 ft-lbs torque.
Trask Performance: http://traskperformance.com
]]>
The 1/8 spacer (part# AM004-007) with stock derby cover is required when installing our VP-LT series, VP95LT, VP84LT and VP68LT for these models.
Detail fitment information, go to the Tech-Tips page.
AM004-007 MSRP $45.00-
1/8 derby cover spacer, for '15 and later the Narrow primary cover Models
Also we now release the Derby cover gasket for the Narrow primary cover.
AM003-004 MSRP $12.00-
Derby Cover Gasket, for 15 and later the Narrow primary cover Models
]]>
The 1/8 spacer (part# AM004-007) with stock derby cover is required when installing our VP-LT series, VP95LT, VP84LT and VP68LT for these models.
Detail fitment information, go to the Tech-Tips page.
AM004-007 MSRP $45.00-
1/8 derby cover spacer, for '15 and later the Narrow primary cover Models
Also we now release the Derby cover gasket for the Narrow primary cover.
AM003-004 MSRP $12.00-
Derby Cover Gasket, for 15 and later the Narrow primary cover Models
]]>
Please check more detail on their website;
http://www.sscycle.com/product/Variable-Pressure-Clutch-p25712.html
]]>We are proud to announce that S&S cycle carries our VP95LT. The VP95LT is the only clutch kit that can upgrade your stock clutch to handle your "Biggest Baddest Monster Motor". This special blue version is available exclusively from S&S Cycle.
Please check more detail on their website;
http://www.sscycle.com/product/Variable-Pressure-Clutch-p25712.html
]]>
MSRP $245.00 |
|
Harley Davidson has new "Assist and Slip Clutch" on 2013 and later CVO models, 2013 and later Tri-Glide models and 2015 and later Ultra Limited Low and Electra Glide Classic Low Models. Our "VP-SDR" fits on these models.
]]>Harley Davidson has new "Assist and Slip Clutch" on 2013 and later CVO models, 2013 and later Tri-Glide models and 2015 and later Ultra Limited Low and Electra Glide Classic Low Models. Our "VP-SDR" fits on these models.
]]>
]]>
Friday we only accept by voice mail, e-mail, fax message only.
If you have emergency, please call 714-848-3030 and leave your contact information so that we will get you back asap.
]]>The Reverse Gear Mamba is proven to be stronger than some of the more higher-profile competitor models out there.The Reverse Gear Mamba is proven to be stronger than some of the more higher-profile competitor models out there.The Reverse Gear Mamba is proven to be stronger than some of the more higher-profile competitor models out there.]]>